For heating up to 150 sq ft (120V systems) or up to 300 sqft (for 240V systems). HeatTech Electric Floor Heating Mats consist of a ~1/8" thick heating cable secured on top of an adhesive mesh, measuring 20" wide. The cable is pre-spaced at 3" to provide the most efficient heat output in typical residential settings. Adhesive mesh backing makes manipulating, positioning and securing the mat easy, saving time and labor involved. With only (1) cold lead, it is easy to install both single and multiple runs of HeatTech radiant floor heating mats. HeatTech mats come in a variety of lengths, making it easy to accommodate almost any type of floor heating project. HeatTech electric radiant heating mats are design to best fit heating areas consisting of (1) or more rectangles. The mesh can be cut when needed, to achieve desired versatility and project’s layout requirements.

HeatTech Electric Radiant Floor Heating Cable is designed to work in projects that require added flexibility for warm floor installation. These include heating areas with complex perimeter, such as curved and angled heating area borders, as well as projects where standard system output at 3" cable spacing is not suitable. Positioning the cable at 2" will increase the warm floor system output, which may be necessary in localities with colder climate or in projects with high thermal mass of the subfloor and flooring combined. Spacing the radiant heating cable at 4" will reduce the system output, making it suitable for warmer climates. HeatTech Cable Guides are specially designed for installation of heating cable at 2", 3" or 4" spacing and can be cut as needed to properly secure the cable to the subfloor.

To enhance performance of HeatTech in-floor radiant heating system and maximize energy savings, it is highly recommended to install the system in combination with a floor sensing thermostat and a floor sensor. This combination allows for a significantly faster response time of the warm floor system and will eliminate unnecessary cycling due to temperature changes in the surrounding environment. Select floor sensing thermostat models are available with a built-in 5mA GFCI for added safety in wet areas installation (bathrooms, showers, etc.)